Model1000
Solid State Pressure Switch
The Model 1000 is a high quality, stainless steel media isolated Solid State Pressure Switch. This highly repeatable switch is designed for use when measuring gases and liquids that are compatible with stainless steel. The Model1000 is offered with factory set switch points. Packaged with heavy duty relay contacts, as well as high electrical isolation, this pressure switch is built to handle a variety of applications. The Model 1000 is ideal for applications that require consistent repeatability, excellent long-term stability, trouble free operation, long life and high performance. The competitive pricing set for the Model 1000 in no way diminishes it's performance.
Benefits
- Krystal Bond Technology ™
- High Strength Stainless Steel Construction
- No Silicone Oil, No Internal O-rings, No Welds
- Wide Operating Temperature Range
- Switch Points up to 10,000 PSI
- Switching Capability of 1 Amp @ 24VDC or 0.5 Amps @ 125VAC, max
- Low Static and Thermal Errors
- Unparalled Price to Performance Ratio
- Rugged Design Survives Harsh Environments
- Compatible with a Wide Range of Liquids
- Suitable for High Shock and Vibration Applications
Applications
- OEM Equipment
- Compressors
- Test Stands
- Refrigeration
- Off Road
- Pneumatics
- Process Control
- Semiconductor Processing
Click Here For Wiring Information
Performance @ 25°C (77°F)
Environmental Data
Electrical Data
Ordering Information
| 1000 Series Type |
A |
100 |
P |
C |
01 |
E |
1 |
000 |
|
||||||||||||||||||||||||||||||||||||||||||||||||
| Process Connection A= 1/4"-18 Male NPT B= 1/8-27 Male NPT C= 1/4"BSPP N= 1/4 VCR Male |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Switch Point Insert Switch Point code: Chart 1 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Pressure Unit B= BAR | K= kg/cm2 | P= PSI |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Switch Configurations C= Normally Open D= Normally Closed E= Normally Open (1 pair) & Normally Closed (1 pair)* |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| System/Line Pressure, Max. Insert Max PSI code from Chart 2 |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Electrical Interface
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Wetted Material 0= 17-4PH Stainless Steel 1= 316L Stainless Steel |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Options 00= No special options |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| *Note: Switch Configuration "E only, available with DIN43651 and 6 Pin Bendix Electrical Interfaces. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Warranty
Workmanship - Model1000 solid state pressure switches have a limited one-year warranty to the original purchaser. AST will replace or repair, free of charge, any defective pressure switch. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST's sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit!
Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter.
