Panel Mount Pressure Sensor
AST4200

In order to simplify installation of pressure sensors for control panel applications, American Sensor Technologies offers the AST4200 Panel Mount Pressure Sensor. This innovative sensor is mounted directly through the panel without the need for additional adapters, eliminating potential leak paths. Click here for a detailed application note on the uses and benefits of the panel mountable fitting.
AST's Krystal Bond™ Technology is the foundation of the AST4200 panel mount pressure sensor. Users experience excellent accuracy, long-term stability and repeatable results.


Benefits
- Krystal Bond™ Technology
- High Strength Stainless Steel Construction
- No Oil, Welds or Internal O-rings
- Ranges up to 10,000 PSI
- Low Static and Thermal Errors
- Unparalleled Price and Performance
- Compatible with Various Liquids and Gases
- EMI/RFI Protection
- Simple Installation for Panel Builders
- UL/cUL 508 Approved
- CE EN61326
Applications
- Control Panels
- Industrial OEM Equipment
- Hydraulic Systems
- HVAC/R Equipment
- Data Loggers
Similar Products
- AST4000 -
OEM Pressure Sensor
- AST2000 -
Industrial Pressure Transducer

Performance @ 25°C (77°F)
Stability (1 Year)
±0.25%FS, typ
Overange Protection
2X Rated Pressure
Burst Pressure
5X or 20,000 psi (whichever is less)
Pressure Cycles
> 100 Million
1 Accuracy includes: Non-linearity, Hysteresis and Non-repeatability
Environmental Data
Operating
-40 to 85°C (-40 to 185°F)
Storage
-40 to 100°C (-40 to 212°F)
Compensated Range
0 to 55°C (32 to 131°F)
Temp. Comp. Zero
<±1.5% of FS
Temp. Comp. Span
<±1.5% of FS
Vibration
EN 60068-2-6, 60068-2-64,
and IEC 68-2-32
Rating
IP-66 (housing only)
Electrical Data
Output
4-20mA
1-5VDC, 1-6VDC
0-50mV
0.5-4.5V Ratiometric
Excitation
10-28VDC
10-28VDC
5VDC,typ
5VDC,reg
Output Impedance
>10k Ohms
<100 Ohms, Nominal
1100 Ohms, Nominal
<100 Ohms, Nominal
Current Consumption
20mA, typ.
<10mA
<5mA
<10mA
Bandwidth
(-3dB): DC to 250 Hz
(-3dB): DC to 1kHz
(-3dB): DC to 5kHz, min
(-3dB): DC to 1kHz
Output Noise
-
<2mV RMS
-
<2mV RMS
Zero Offset
<±1% of FS
<±1% of FS
<±2% of FS
<±1% of FS
Span Tolerance
<±1.5% of FS
<±1.5% of FS
<±2% of FS
<±1.5% of FS
Output Load
0-800 Ohms
@10-28VDC
10k Ohms, Min.
>1M Ohms
10K Ohms, Min.
Reverse Polarity
Yes
Yes
-
Yes
Ordering Information
AST4200 |
J |
00100 |
P |
4 |
A |
0 |
000 |
| PSIG Measurement |
Pressure Range Code |
BARG Measurement |
Pressure Range Code |
| -14.7 to 25** |
V0025** |
-1 to 2** |
V0002** |
| 0-25 |
00025 |
0-2 |
00002 |
| 0-50 |
00050 |
0-5 |
00005 |
| 0-100 |
00100 |
0-7 |
00007 |
| 0-150 |
00150 |
0-10 |
00010 |
| 0-200 |
00200 |
0-20 |
00020 |
| 0-250 |
00250 |
0-35 |
00035 |
| 0-500 |
00500 |
0-50 |
00050 |
| 0-1,000 |
01000 |
0-70 |
00070 |
| 0-2,500 |
02500 |
0-100 |
00100 |
| 0-5,000 |
05000 |
0-250 |
00250 |
| 0-7,500 |
07500 |
0-350 |
00350 |
| 0-10,000 |
10000 |
0-500 |
00500 |
|
|
0-700 |
00700 |
| *Typical ranges. All ranges between 0-25 PSI and 0-10,000 PSI available. |
| **Compound ranges up to -14.7 to 500 PSI available. Please consult factory. |
|
Panel Mount
Series Type |
|
|
|
|
|
|
|
Process Connection
A= 1/4" NPT Male
J= 1/8" NPT Female
V= 1/8" BSP Female |
|
|
|
|
|
|
Pressure Range
Insert 5-digit pressure measurement code |
|
|
|
|
|
Pressure Unit
B= BAR
K= kg/cm2
P= PSI |
|
|
|
|
Outputs
| 1= 0.5-4.5V ratiometric |
6= 1-6V |
| 3= 1-5V |
A= 10mV/V |
| 4= 4-20mA (2 wire loop powered) |
|
|
|
|
| Electrical |
|
| A= 2 ft. (0.6m) |
F= Packard Metripack 150 3-Pin Conn. |
| B= 4 ft. (1.2m) |
No housing: G= 4-pin Molex Conn.
|
| C= 6 ft. (1.8m) |
I= DIN 43650A |
| D= 10 ft. (3.0m) |
K= Deutsch DT04-3 Pin |
| E= Mini DIN43650 |
Z= Deutsch DT04-4 Pin |
|
|
|
Wetted Material
0= 17-4PH
|
|
Options
000= No Options |
Warranty
AST warrants that units shipped will be free from defects in material and workmanship for a period of one (1) year from date of shipment.
For complete warranty information visit: http://www.astsensors.com/warranty.php