AST46PT-Factory-Sealed

Factory Sealed Gauge | ASIC | CSA Approved Explosionproof Pressure/Temperature Transmitter

AST46PT high accuracy Explosionproof Pressure/Temperature Transmitter is CSA approved for use in hazardous areas including:

• CSA 30 (UL1203/FM3615) Class 1 Zone 1 Group IIC
• CSA 30 Class 1 Div 1 Groups A, B, C, D Explosionproof
• CSA 30 Class 2 Div 1 Groups E, F, G Dust Ignition-proof

Applying digital compensation, this product offers top performance over a wide temperature range. Utilizing Krystal Bond Technology™, the sensing element will measure pressure in the most extreme temperature conditions. Where other sensor technologies will freeze or boil, the AST46PT uses a one piece stainless steel sensor to offer continuous operation.

Benefits

- Krystal Bond™ Technology
- ANSI 12.27.01-2003 Single Seal Approved
- Pressure and Temperature Output from One Device
- ASIC Compensation
- Superb Temperature Performance
- Wide Operating Temperature Range
- Excellent Accuracy
- High Proof and Burst Pressure
- Ranges from 100 to 20,000 PSI (Factory Sealed Gauge)*
- Available in Exotic Alloys (Consult Factory for Inconel 718 or Hastelloy C276)

For pressures less than 100 PSI, see AST46PT Vented Gauge Pressure data sheet.

Applications

- Well Optimization
- Oil and Gas Pipelines
- Drilling Platforms
- Marine & Offshore
- CNG / Hydrogen Fill Stations
- Paint Booths
- Remote Telemetry Unit
- Cold Climate Drilling & Mining

¹ Accuracy includes: Non-linearity, Hysteresis and Non-repeatability

 

Ordering Information

AST46PT	1	A	01000	P	3	T	1	H	000	Pressure Ranges+ Pressure in PSI, Sealed Pressure Range Code 0-100 00100 0-200 00200 0-500 00500 0-1,000 01000 0-1500 01500 0-2,500 02500 0-3000 03000 0-5000 05000 0-7500 07500 0-10,000 10000 0-15,000 15000 0-20,000 20000 + For gauge pressure units, see AST46PT Vented Gauge Pressure data sheet.
Series Type
Temperature Output 1= -40 to 85°C (-40 to 185°F) 2= -40 to 125°C (-40 to 250°F) 3= 0 to 70°C (30 to 158°F) 4= -55 to 125°C (-65 to 250°F) 5= -18 to 93°C (0-200°F)
Process Connection A= 1/4" NPT Male* I= 1/4" NPT Female* P= 1/2" NPT Male* W= F250C Female Autoclave (10,000-20,000 PSI)
Pressure Range Insert pressure range code from chart.
Pressure Unit B= BAR K= kg/cm2 P= PSI
Outputs 1= 0.5-4.5V ratiometric 2= 0-5V (3 wire) 3= 1-5V (3 wire + case connection) 4= 4-20mA (loop powered + case connection) 5= 0-10V (3 wire) 6= 1-6V (3 wire + case connection) G= 1-10V
Electrical Interface T=2 ft. 18 AWG wires U=4 ft. 18 AWG wires W=2 Meter 18 AWG wires
Wetted Material 0= 17-4PH 2= Inconel 718** 1= 316 L* 4= Hastelloy C276**
Failure State H= High L= Low N= None
Options 000= No Special Options
*Available up to 10,000 PSI, **Contact Factory on Availability

AST46PT Wiring

Output	Power Connections		Output Connections		Green	Length	For U.S. installations, sensor case ground (green wire) must be bonded to ground according to Article 501 & 505 of the NEC.
	Red	Black	White	Blue
Voltage	+V Supply	-V Supply	Pressure	Temp	Case Ground	4.68"
4-20mA	+ Pressure	- Pressure	- Temp	+ Temp	Case Ground	5.18"

 

Quick Contact

In less than a minute, you can contact AST with your requirements....

Company Name:

Contact Name:

Email Address:

Phone:

Model Number: (Create your model number from the ordering chart above)

Would you be interested in something similar from stock?*

Comments

*AST has over 1,000 pressure sensors it can ship from stock for orders received by noon, EST. Submit your configuration and AST can offer the best solution available.

Warranty

Workmanship - AST46PT explosion-proof pressure transmitters have a limited one-year warranty to the original purchaser. AST will replace or repair, free of charge, any defective pressure transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST's sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit! Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter.

Datasheet
w/ Dimensions

Accessories