Explosion Proof Pressure Transmitter

AST46HA

AST46HA Class I Div 1 Explosion-proof Pressure Transmitter with Single Seal product photo

 

AST46HA high accuracy explosion-proof pressure transmitter is CSA approved for use in hazardous areas including:

  • CSA 30 (UL1203/FM3615) Class 1 Zone 1
    Group IIC
  • CSA 30 Class 1 Div 1 Groups A, B, C, D Explosionproof
  • CSA 30 Class 2 Div 1 Groups E, F, G Dust Ignition-proof
Applying digital compensation, this product offers top performance over a wide temperature range. Utilizing Krystal Bond Technology™, the sensing element will measure pressure in the most extreme temperature conditions. Where other sensor technologies will freeze or boil, the AST46HA uses a one piece stainless steel sensor to offer continuous operation.

CSA

CE

American Bureau of Shipping Type Approval

Design Benefits

- ANSI/ISA - 12.27.01.2003 Certified "Single Seal" (no need for expensive secondary seal)
- ABS (American Bureau of Shipping) Approved
- CRN B31.3 Approval Available
- Excellent Accuracy and Performance over Cold and Hot Temperatures
- High Proof and Burst Pressure
- Consult Factory for Inconel 718 or Hastelloy C276

Applications / Industries

- Well Optimization
- Oil and Gas Pipelines
- Drilling Platforms
- Marine & Offshore
- CNG / Hydrogen Fill Stations
- Paint Booths
- RTU
- Cold Climate Drilling & Mining

Similar Products


- AST4600 - Explosion Proof Pressure Transducer
- AST46DS - Explosion Proof Pressure Transducer with Display
- AST46PT - Explosion Proof Pressure & Temperature Transmitter
- Explosion Proof Operating Instructions

Quick Contact

Performance @ 25°C (77°F)

Accuracy1
<±0.1% BFSL
Stability (1 Year)
± 0.1% FS, typical
Proof Pressure
2X Rated Pressure
Burst Pressure
5X or 50,000 PSI, whichever is less
Pressure Cycles
>100 Million

1 Accuracy includes: Non-linearity, Hysteresis and Non-repeatability

Environmental Data

Temperature
Operating
Ambient: -40 to 85°C (-40 to 185°F) Media: -55 to 125°C (-67 to 257°F)
Storage
-50 to 105°C (-58 to 221°F)
Thermal Limits
Compensated Range
-30 to 55°C (-22 to 131°F)
TC Zero
<±0.5% FS
TC Span
<±0.5% FS
Other
Shock
EN 60068-2-27
Vibration
EN 60068-2-6, 60068-2-64,
and IEC 68-2-32
EMI/RFI Protection
Yes
Rating
IP-66

 

Electrical Data

Output Signal
4-20mA
0-5V, 1-5V, 1-6V
0-10V, 1-10V
0.5-4.5V Ratiometric
Excitation
10-28 VDC
10-28 VDC
15-30VDC
5VDC, Regulated
Current Consumption
-
<10mA
<10mA
<10mA
Output Noise
<1mV, RMS
<1mV, RMS
<1mV, RMS
<1mV, RMS
Zero Offset
<±0.5% FS
<±0.5% FS
<±0.5% FS
<±0.5% FS
Span Tolerance
<±0.5% FS
<±0.5% FS
<±0.5% FS
<±0.5% FS
Output Load
0-800 Ohms
@10-28VDC
5k Ohms,min.
5k Ohms,min.
5k Ohms,min.
Reverse Polarity
Yes
Yes
Yes
Yes
Sampling Rate
400Hz
400Hz
400Hz
400Hz

pdf icon
Datasheet

AST46HA Pressure Transducer Ordering Information

AST46HA
A
G
0500
P
3
T
1
H
000
-Z
Pressure PSI Pressure Code Gauge
0-1
G
0001
0-2.5
G
0069*
0-5
G
0005
0-7.5
G
0208*
0-10
G
0010
0-15
G
0015
0-25
G
0025
0-50
G
0050
0-100
G
0100
0-200
G
0200
0-500
G
0500
0-1,000
G
1000
*2.5 and 7.5 PSI Sensor must be ordered in inches of H2O..
Pressure PSI Pressure Code Sealed Gauge
0-100
0
0100
0-200
0
0200
0-500
0
0500
0-1,000
0
1000
0-1,500
0
1500
0-2,500
0
2500
0-3,000
0
3000
0-5,000
0
5000
0-7,500
0
7500
0-10,000
1
0000
0-15,000
1
5000
0-20,000
2
0000
Series Type                    
Process Connection*
A= 1/4" NPT Male (up to 10,000 PSI)
I= 1/4" NPT Female (up to 15,000 PSI)
P= 1/2" NPT Male (up to 15,000 PSI)
W= F250C Female Autoclave (10,000 to 20,000 PSI)
*for other ports contact factory, "W" not available in 316L
                 
Pressure Reference
G= Gauge Pressure**
V= Gauge Pressure** (vacuum calibrated)
0= Sealed Gauge up to 9,999 PSI
1= Sealed Gauge up 10,000 to 19,999 PSI
2= Sealed Gauge 20,000 PSI
** not suitable for Class II
               
Pressure Measurement
Insert pressure measurement code from chart
             
Pressure Unit
B= BAR H= Inches H2O K= kg/cm2 P= PSI
           
Outputs
1= 0.5-4.5V ratiometric
2= 0-5V (3 wire)
3= 1-5V (3 wire + case connection)
4= 4-20mA (loop powered + case connection)
5= 0-10V (3 wire)
6= 1-6V (3 wire + case connection)
G= 1-10V
         
Electrical Interface
T=2 ft. 18 AWG wires
U=4 ft. 18 AWG wires
W=2 Meter 18 AWG wires
       
Sensor Material
0= 17-4PH stainless steel 2= Inconel 718***
1= 316L stainless steel 4= Hastelloy C276***

***consult factory on availability
     
Failure State
H= High L= Low N= None
       
Options
000= No Special Options
     
-Z= CRN Registered to ANSI/ASME B31.3.
Contact factory for material, pressure, and process connection options
   

Contact AST

In less than a minute, you can contact AST with your requirements....

(Create your model number from the ordering chart above)

*AST has over 2,000 pressure sensors and transducers it can ship from stock for orders received by noon, EST. Submit your configuration and AST can offer the best solution available or browse our sensors in stock online.

Warranty

AST warrants that pressure transmitters shipped will be free from defects in material and workmanship for a period of one (1) year from date of shipment.

For complete warranty information visit:

http://www.astsensors.com/warranty.php

Pressure Transducers Pressure Sensor Applications Contact AST
AST4000
AST4300
AST4400
AST44LP
AST4510
AST4520
AST4530
AST4600
AST46DS
AST5100
AST5300
AST5400
Explosion-Proof Transmitters
HVAC Pressure Sensors
Hydraulic Pressure Sensors
Hydrogen Pressure Sensors
Liquid Level Sensors
Tank Level Sensors
Water Pressure Sensors
450 Clark Drive
Mount Olive, NJ 07828 USA
(973) 448-1901
info@astsensors.com
Privacy Policy
©2014 TE Connectivity Ltd. family of companies. All Rights Reserved
Your Sensor Business Partner • ISO 9001:2008