AG200
Loop-Powered Digital Pressure Gauge | Pressure Transmitter with Display
The AG200 is a media-isolated, digital pressure gauge that offers a 4-20mA output signal with a large LCD display. Utilizing Krystal Bond™ Technology, the AG200 provides the same quality and performance as AST's sensors, but through a local readout with a backlight feature. The AG200 also has the option of zero and span calibration, allowing the user to reset the gauge, or adjust the calibration points to their exact needs.
Specifications
Loop Current Update Rate - 32 times per Second
Display Update Rate - 3 times per second
Power - 7.5 to 32VDC
Output - 4-20mA loop powered
Reverse Polarity Protection - Yes
Benefits
- Krystal Bond Technology ™
- One piece stainless steel sensing element
- 4-20mA Loop-powered with local display
- Reverse Polarity Protection
- Zero / Span / Current Calibration
- Test Current Feature
- Variety of selectable measurement ranges
Applications
- OEM Equipment
- HVAC / Refrigeration Monitoring
- Test Stands / Benches
- Automation
- Water Management
Performance @ 25°C (77°F)
1 Accuracy includes: Non-linearity, Hysteresis and Non-repeatability
Environmental Data
Electrical Data
Ordering Information
AG200 |
A |
00100 |
P |
4 |
E |
0 |
000 |
|
||||||||||||
| Series Type | ||||||||||||||||||||
| Process Connection A= 1/4" NPT Male J= 1/8" NPT Female |
||||||||||||||||||||
| Pressure Range Insert 5-digit pressure range code |
||||||||||||||||||||
| Pressure Unit P= PSI |
||||||||||||||||||||
| Outputs 4= 4-20mA (2 wire loop powered) |
||||||||||||||||||||
| Electrical E= Mini DIN 43650 (mate included) |
||||||||||||||||||||
| Wetted Material 0= 17-4PH |
||||||||||||||||||||
| Options 000= No Special Options |
||||||||||||||||||||
Warranty
Workmanship - AG200 pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective pressure transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST's sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit!
Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter.
