Home Products MEMS Technology Applications About AST Contact Us

Model5000

Differential Pressure Sensor - DP Transmitter (DISCONTINUED)

Model5000 Wet/Wet Differential Pressure Sensor product photo

The Model 5000 wet/wet differential pressure transmitter measures both liquids and gases compatible with stainless steel, but without the use of fluid-filled cavities. This eliminates the risk of system contamination and at the same time offers all of the benefits associated with AST's MEMs-based Krystal Bond Technology. In the event that either pressure port is at full line pressure and the other at zero, no damage can be done to the transducer/transmitter.

Benefits

- Krystal Bond Technology ™
- Compact, Rugged Design
- High Strength Stainless Steel Construction
- No Fluid Fill Cavities or Internal O-rings
- Differential Ranges up to 1,000 PSI [70 Bar]
- Wide Operating Temperature Range
- Excellent Price to Performance Ratio
- CE EN61326

Applications

- Filtration
- Industrial OEM Equipment
- Gas Compressors
- Off Road / Marine
- HVAC/R
- Test Stands
- Hydrogen*
- Train Braking Circuits
- Data Loggers
- Water Management

*Please consult factory for wetted materials

Click Here For Wiring Information

Performance @ 25°C (77°F)

Accuracy¹

<± 0.3% BFSL

Stability (1 Year)

0.25% of FS, typical

Proof Pressure

Rate line pressure on either P1 or P2

Burst Pressure

5 x the rated line pressure or 2,000PSI

Total Error Band

±1.5% of FS

Pressure Cycles

>10 Million

¹ Accuracy includes: Non-linearity, Hysteresis and Non-repeatability

Environmental Data

Temperature

Operating

-40 to 85°C (-40 to 185°F)

Storage

-40 to 100°C (-40 to 212°F)

Thermal Limits

Compensated Range

0 to 55°C (30 to 130°F)

Temp. Comp. Zero

<±1.5% of FS

Temp. Comp. Span

<±1.5% of FS

Other

Shock

100G, 11msec, 1/2 sine

Vibration

10G peak, 20 to 2000 Hz

EMI/RFI Protection

Yes

Rating

IP-66

Electrical Data

Output

4-20mA

Voltage (.25-5V, 1-5V, 1-6V)

0.5-4.5V Ratiometric

Excitation

10-30VDC

10-30VDC, typ.

5VDC

Output Impedance

<100 Ohms, Nominal

Current Consumption

25mA

<10mA

Bandwidth

(-3dB): DC to 250 Hz

(-3dB): DC to 1kHz

Reverse Polarity

YES

Ordering Information

5000

0100

0050

Series Type

Process Connection
A= 1/4" Male NPT
C= 1/4" BSP Male
J = 1/8" Female NPT

				Line Pressure PSI
				100	150	200	250	500	750	1000
			Code	0100	0150	0200	0250	0500	0750	1000
P S I D	D i f f e r e n t i a l P r e s s u r e	20	0020	x	-	-	-	-	-	-
		25	0025	x	-	-	-	-	-	-
		30	0030	x	x	-	-	-	-	-
		50	0050	x	x	x	-	-	-	-
		75	0075	x	x	x	x	-	-	-
		100	0100	x	x	x	x	x	-	-
		150	0150	-	x	x	x	x	x	-
		200	0200	-	-	x	x	x	x	x
		250	0250	-	-	-	x	x	x	x
		300	0300	-	-	-	-	x	x	x
		400	0400	-	-	-	-	x	x	x
		500	0500	-	-	-	-	x	x	x
		750	0750	-	-	-	-	-	x	x
		1000	1000	-	-	-	-	-	-	x
		“x” denotes differential pressure range available. Bar and kg/cm² available; consult factory for ordering assistance.

Line Pressure
Insert 4-digit pressure code from chart

Pressure Unit
B= BAR
K= kg/cm2
P= PSI

Outputs
5VDC Supply:
1=0.5-4.5V ratiometric
10-28 VDC Supply:
3=1-5V
4=4-20mA
6=1-6V

Electrical
A= 2 ft. (24 AWG) (0.6m)
B= 4 ft. (24 AWG) (1.2m)
E= Mini DIN 43650
L= Conduit 2 ft. (0.6m)

Wetted Material
0= 17-4PH
1= 316L

Differential Pressure Range
Insert 4-digit code from chart

Options
000= No Special Options

Warranty

Workmanship - AST differential pressure transmitters have a limited one-year warranty to the original purchaser. AST, Inc. will replace or repair, free of charge, any defective transmitter. This warranty does not apply to any units that have been modified; misused, neglected or installed where the application exceeds published ratings. AST's sensors are made with pride in New Jersey, USA. If in the area please feel free to stop by for a visit!

Installation/Applications - The purchaser is responsible for media compatibility, functional adequacy, and correct installation of the transmitter.

Datasheet
w/ Dimensions

Accessories